Home - Return to Previous Page
Holley GM/LS Retro-fit Oil Pan, Polished
HLY-302-2P
retrofit installations in GM muscle trucks
1967-69 Camaro/Firebird
1968-74 Nova/Apollo/Ventura/Omega
1982-92 F-body
1978-87 G-body
1964-72 A-body
Total Oil Capacity with stock oil filter 6.2 Quarts
Oil Filter Wix 57060
Requires use of LS3 dipstick GMP-12669528 and tube GMP-12625031
Polished Finish
1967-69 Camaro/Firebird
1968-74 Nova/Apollo/Ventura/Omega
1982-92 F-body
1978-87 G-body
1964-72 A-body
Total Oil Capacity with stock oil filter 6.2 Quarts
Oil Filter Wix 57060
Requires use of LS3 dipstick GMP-12669528 and tube GMP-12625031
Polished Finish
Please Call for Availability
(931)829-2200
Description
GM LS Retro-fit Oil Pan - 1955-87 GM/Muscle Car/Classic Car/Trucks Cars requiring more clearance at the front half of the oil pan Great for 1967-69 Camaro/Firebird, 1968-74 Nova/Apollo/Ventura/Omega, 1982-92 F-body, 1978-87 G-body, and 1964-72 A-body applications. GM’s popular LS engines are finding their way into a large variety of vehicles. They make great power, plus they’re very durable and reliable. Unfortunately, the factory LS pans don’t always fit or they hang too low for today’s hot rods. Holley’s new LS Retro-fit Engine Oil Pan is designed to help! It provides maximum clearance to the chassis and ground, plus provides an OEM fitment for durability and proper sealing.
ATTENTION! 302-2 is designed to use a GM “F-body” windage tray, GM P/N 12558253. A modification to the windage tray is required to provide clearance to the pick-up tube. A full-length windage tray may be used if the front quarter of the tray is removed. See the instruction sheets showing the windage tray modifications and overall length required. ATTENTION!
- Designed for LS engine retrofit installations in GM muscle/classic car and truck chassis requiring more oil pan to chassis clearance around the front half of the oil pan.
- Perfect for: 1967-69 Camaro/Firebird, 1968-74 Nova/Apollo/Ventura/Omega, 1982-92 F-body, 1978-87 G-body, and 1964-72 A-body applications
- Oil pan #302-2 may not be used with LS7 engines or “stroker” engines greater than 3.62”.
- Can be used anywhere a GM F-Body oil pan can be used
- New applications will be added as testing confirms fitment
- Provides OEM fitment - OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity and OEM bell-housing attachments
- Traditional high-quality cast aluminum appearance with clean exterior styling
- Provides maximum clearance for vehicles where the steering linkage is behind the engine crossmember
- Cast and machined aluminum
- Complete kit includes sump baffle, OE style pick-up tube, sump plug, oil filter stud, oil passage cover, etc
ATTENTION! 302-2 is designed to use a GM “F-body” windage tray, GM P/N 12558253. A modification to the windage tray is required to provide clearance to the pick-up tube. A full-length windage tray may be used if the front quarter of the tray is removed. See the instruction sheets showing the windage tray modifications and overall length required. ATTENTION!
Specifications/Information
LS engine retrofit installations in GM muscle/classic car and truck chassis requiring more oil pan to chassis clearance around the front half of the oil pan. Perfect for: : 67-69 Camaro/Firebird, 68-74 Nova/Apollo/Ventura/Omega
NOTE – Oil pan #302-2 may not be used with LS7 engines or “stroker” engines greater than 3.62”.
Can be used anywhere a GM F-Body oil pan can be used
Sump Oil Capacity – 5.7 Quarts Total Oil Capacity with stock oil filter – 6.2 Quarts Requires use of LS3 dipstick (GM P/N 12634547) and tube (GM P/N 12625031) *Engine location may need to be adjusted (up / down or fore / aft) for cross member or steering linkage clearance depending on the vehicle, steering configuration and chassis type. 302-2 is designed to use a GM “F-body” windage tray, GM P/N 12558253. A modification to the windage tray is required to provide clearance to the pick-up tube. A full-length windage tray may be used if the front quarter of the tray is removed. See the instruction sheets showing the windage tray modifications required. Additional Parts Needed (Oil Pan Gasket GM® 12612350 or equivalent, High Quality RTV sealer, Oil Filter -AC Delco® PF48 or equivalent)
DOES NOT work with G-body applications.
NOTE – Oil pan #302-2 may not be used with LS7 engines or “stroker” engines greater than 3.62”.
Can be used anywhere a GM F-Body oil pan can be used
Sump Oil Capacity – 5.7 Quarts Total Oil Capacity with stock oil filter – 6.2 Quarts Requires use of LS3 dipstick (GM P/N 12634547) and tube (GM P/N 12625031) *Engine location may need to be adjusted (up / down or fore / aft) for cross member or steering linkage clearance depending on the vehicle, steering configuration and chassis type. 302-2 is designed to use a GM “F-body” windage tray, GM P/N 12558253. A modification to the windage tray is required to provide clearance to the pick-up tube. A full-length windage tray may be used if the front quarter of the tray is removed. See the instruction sheets showing the windage tray modifications required. Additional Parts Needed (Oil Pan Gasket GM® 12612350 or equivalent, High Quality RTV sealer, Oil Filter -AC Delco® PF48 or equivalent)
DOES NOT work with G-body applications.
Videos
Details
- HLY-302-2P
- HLY-302-2P
- Holley
- New
Shipping Information
- Item Requires Shipping
- 16.0 lbs.
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!